Setup
You can activate and customize certain i-Guide features such as the Flip Bar, Lock options, Cable Box settings, Audio settings and Languages from the Setup Menu.

Guide Setup
Use your remote to select Setup from the Main Menu, then select Guide Setup.

Use the buttons to select from the following Setup options:
Flip Bar Position – The Flip Bar can appear either at the top or bottom of your screen.
Flip Bar Timeout – Change the amount of time in which the Flip Bar will stay on your screen from 3 to 15 seconds.
Auto-Tune

• Yes – Automatically tunes to a channel after 2 seconds when you enter numbers on your remote.
• No – Enter 3 digits or press OK after entering numbers on the remote.

Message – Select On to make the message envelope appear when a new message is received.
Reminder Notice – Adjust the amount of time in which the Reminder Notice will appear before the start of a program from 1–15 minutes.
Listing Grid Height – Adjust the listings for single- or dual-height grid display.

Cable Box Setup
Time Display

• Off - Displays the currently tuned channel on the front of the cable box.
• On - Displays the current time on the cable box.

AC Outlet

• Switched - Determines that power is available only when the cable box is on.
• Unswitched - Allows the power to remain constant to the outlet on the back of the cable box.

See Configuration – Highlight and press OK to show the configuration screen (includes information your cable company may need in the event of a problem with your service).

Audio Setup
Default Audio Language Change secondary digital audio available with certain networks and programs.
Press buttons to change the default language to English, Spanish, French or Portuguese.

Optimal Stereo Volume

• No - Volume is unchanged from the current setting.
• Yes - Volume is automatically adjusted to the optimal level.

Dolby Digital

• ON – Turns Dolby Digital on (available only for equipment supporting Dolby Digital).
• OFF – Turns Dolby Digital off.

Audio Output: Choose if the audio output goes to your TV or to your stereo.

• TV Speaker – is the default setting.
• Select Advanced to change the settings for Compression and Stereo Output.

Screen Position Setup
To alter your screen position:

• From the Setup Menu, select Screen Position Setup to adjust the screen position.
• Use the UP-DOWN-LEFT-RIGHT buttons on your remote until the display arrows are centered on the screen.

Text Language Setup

• From the Setup Menu, select Text Language Setup.
• Select English, Canadian English, Canadian French or Spanish to change the language of the on-screen commands, selection bars and help screens within i-Guide.
• To confirm, select Yes.